See below for more details on the specifications and application
of the 6500 Master clock & GPS.
6500
GPS
 | The 6500-2320 Master Clock is designed to be compatible with the full range of Simplex and other Master Clock Systems, providing impulse, synchronous-wired and BCD digital time code outputs. The 6500 derives it’s accuracy either from the 50/60Hz mains frequency, another Simplex Master via serial BCD, or the 6500 GPS Module which provides a time and date reference to within 10ms (or better) of UTC. A programming facility is provided for the control of local electrical loads such as bells/signals, lighting, air-conditioning, etc, on a time of day basis. Timekeeping is maintained for a minimum of 20 hours in the event of power failures, and upon restoration of mains power, slave clocks are restored to correct time and the status of all control circuits are updated to the correct state. Programming and override information is entered via the keyboard aided by alpha-numeric prompts on the illuminated LCD display. Controls may be programmed for ON/OFF function or pulsed from 1-60 seconds.
6500 Data Sheet
|
 | Features
• Channels: 12
• Position accuracy: 25M CEP
• Velocity accuracy: 0.1M/s
• Reacquisition time: 0.1 sec average
• Hot start time: 8 sec average
• Warm start time: 38 sec average
• Cold start time: 48 sec average
• Protocols: NMEA-0183 V2.2, SiRF
• DC Voltage: 5.0V +/- 0.25V
• DC Current: 180mA typical
• Backup voltage: +2.5V to 4.5V
• Backup current: 10uA typical
• Temperature: -40 to 85 celcius
• Physical: 72 x 42 x 12mm
GPS Data Sheet
|
